To make the fireplace insert, you could simply use commercial ones already available on the market. Art Vapor Fire Team Focus on Intelligent Fires For more than 10 years.The quality and Technology are reliable with great value.

How To Install Art 3D Water Vapor Fires:

1,Prepare the housing with cutout exactlt to the specifications provided.10mm wider than the drawings for the housing.

To install an Art vapor fireplace, you need to create a housing (a surface that will support the fireplace insert).
2,Leave holes or gaps for air intake bellow the fireplaces.
People may use vapor fires in many different places with different decorations,for traditional fireplace designs with/without logs or for modern designs with/without glasses arround,
For different designs,we should make sure if there is enough air intake bellow the fireplace to let the vapor go upwards.
3,Plug in the system and insert it into the housing.
A standarded Volt electrical outlet is required. (best located inside the housing). The system comes with a 100/240V (50-60 Hz) – 24V UL Listed power adapter (converter).
Unlike other vapor fire systems,An Art Fire vapor fire works with a low voltage system,so it is much safer.

4,Fill the tank with tap water (or hook up the system to plumbing)
If people want to connect the water pipe to the fireplace,people can prepare a water plastic tube from the water pipe system in the housing and connect it to the fireplace.

Turn on the faucet,water will comes into the fireplace automatically.When it comes to a spirit level,it will stop injection.So people no need to add water into the fireplace manually any more.

As you can see, it is not that hard to build your own water vapor fireplace. Sure, you will spend more time to install everything.
So, is it really worth it in the end? Well, that all depends on your crafting skills and your budget.

General conclusions
Water vapor artificial fireplaces are cool gadgets that will certainly entertain your guests! You can now also impress them by explaining the science behind these fake fireplaces! I hope that you enjoyed this review. If you want to know more functions and guidelines about Art water vapor fires,please contact us freely.
Email us at :

We Recommand People buy the device first,and then make the constructions.
As you can see, All water vapor fireplace has a really neat design. Both Led and ULT are important.Ultrasonic fireplaces are not too much complex. The technology rely on a mist maker module. In addition, these mist makers are easy to use. The mist makers need work under a good water quality.
Suggested Range for Water Vapor Fireplaces is 3.5 to 8.5 Grains Per Gallon, Ideal is 7.0
And if people will not use the vapor fireplace,it is better to drain all the water out inside the fireplace to keep the tank inside clean.

How to Install 3D Vapor Fires Insert
Etiquetado en: