Fireplace Button 1:Trapdoor Control
Fireplace Button 2:Switch ON/OFF
Manual ignition:
To ignite the ethanol fireplace,press on the right switch 2 near the LCD screen durning five seconds(the left one is for opening the door of the ethanol tank)
Automatic Ignition:
Ignite and shut the device only with the switch ON/OFF or the remote contro or by “DRY CONTACT”.
Never leave a remote control to the reach of Children.
Press the switch 2 ON/OFF DURING FIVE SECONDS or press on the remote control,it is not necessary with the remote control.the pump will automatically fill up the fireplace.After a few seconds an automatic ignition will take place.If the first ignition is failed,there will be a second one.If the fireplace failed to be lighted up,pls consult the “Error Message”—Er03 or Er04 on the LED screen and read the paragraph”Error Message”.
Never directly refill the burner.or It may case Fire.Dangerious!!!
Shutting:
Shut the device with the switch 2 ON/OFF or press on the remote control only,the pump will stop.Wait arround 4 minutes for the flames to die completely before leaving the firepalce unattended.
For security reasons,it is not possible to restart the device just after its extinction.The temperature of the fireplace must be down under 60″C:140″F before restarting.Pls wait a few minutes.Or the LCD screen will show Er02.This means that the ethanol tray is too hot and it is illegal to start the burner.For more error messages,pls visit:https://www.artethanolfireplace.com/function-features-of-art-electronic-ethanol-fireplaces-burners/
Art Ethanol Fireplace AF100:
Art Ethanol Burner AF150:
